Servo Hydraulic UTM

  • Servo Hydraulic Universal Testing Machine (UTM)

    Based on expertise and experience in control and testing, LABSEN collaborates with the manufacturer UnitedTest for distributing high quality testing machines to our customers. Our products are made for Australian conditions, meet the local regulations, perform safely, provide accurate test data and will last for long life.

    To make sure the products satisfy the stringent requirement, LABSEN works with its collaborative manufacturer in

    • specifying technical specifications,
    • strictly selecting key components,
    • on-site check or remotely check any upgrading function.

    All key components (servo valves, load cells, displacement sensors, hydraulic seals, etc. ) of the servo hydraulic testing machines are selected from well-known manufacturers whereas other mechanical parts are fabricated in the factory of our collaborative partner.

    Furthermore, LABSEN contributes in improving the testing equipment (hardware and control software) and upgrading functions of material testing machines. This unique enhancement is available for our customers to run tests with complex measurement on our supplied testing machines in combining with other existing testing equipment (if available and possible), without ordering entire new testing systems. Please learn more at Enhancing Functions of Material Testing Machines and Customized Testing Systems.

    For very large testing machines, LABSEN has worked with its partners to supply large servo hydraulic testing machines up to 30 MN (3000 tone, with single loading actuator). Please learn more at Customized Test Systems and Contact us for more information.

     

    General Information

    Our hydraulic universal testing machines are precisely controlled by servo hydraulic control and computerized control technologies.

     

    WAW -C Series

    WAW -D Series

    WAW -DS Series

     

    Series WAW servo hydraulic testing machines have wide range of available loading capabilities from 300kN to 2MN.

    C type frame is worm shaft and worm wheel inside the crosshead to drive it up and down.

    D type frame is four column & two leading screw, stable and long working life, chain and motor driving adjusting crosshead moving.

    Features

    • Precise servo hydraulic and computerized controls 
    • Unique screw gap eliminating structure can guarantee the continuity of the test;
    • Independent hydraulic clamping structure can guarantee the reliability of the system; it will not hurt person for falling specimen and ensure the safety of operator;
    • Limitation and electrical protection system can ensure the security of using;
    • Hydraulic pressure sensor as standard load measuring device, optional load cell available.
    • The servo hydraulic machines meet or exceed the requirements of the following standards: ASTM E4, EN10002-2, BS 1610, DIN 51221, ISO 7500-1.

     

    Applications

    The servo hydraulic universal testing machines can perform tension, compression, flexure/bending and shearing test for kinds of specimens. These testing methods are suitable for metal and nonmetal material, such as iron, steel, steel bar, rebar, cement, concrete, rod and so on.

    These testing machines are widely used for industrial application, factory quality control, science and research institute, QC &QA college student training, education institute, testing and inspection center, laboratories, construction company, aerospace, mechanical production, electric appliance fields. 

     

     

    Servo Hydraulic Universal Testing Machines WAW-300C / WAW-600C / WAW-1000C

    Features:

    • C type frame with shafts and worm wheels for moving the crosshead 
    • Servo hydraulic control
    • Computerized control
    • Displacement and force controls
    Model Capacity (kN) Stroke (mm) Tension space Compression space (mm)

    Test width (mm)

    Frame dimensions (mm) Datasheets
    WAW-300C 300 250 800 700 520 920x580x2350 Contact
    WAW-600C 600 250 800 700 520 920x580x2350 Contact
    WEW-1000C 1000 250 850 700 655 1060x700x2850 Contact

     

     

    Servo Hydraulic Universal Testing Machines WAW-300D / WAW-600D / WAW-1000D / WAW-2000D

    Features:

    • 6 columns (4 guiding columns and 2 lifting screws)
    • Servo hydraulic control
    • Computerized control
    • Displacement and force controls 
    Model Capacity (kN) Stroke (mm) Tension space Compression space (mm)

    Test width (mm)

    Frame dimensions (mm) Datasheets
    WAW-300D 300 250 800 700 520 910x550x2370 Contact
    WAW-600D 600 250 800 700 520 910x550x2370 Contact
    WAW-1000D 1000 250 800 700 655 960x650x2600 Contact
    WAW-2000D 2000 250 1000 900 740 1160x1100x2600 Contact

     

     

    Servo Hydraulic Universal Testing Machines WAW-300DS / WAW-600DS / WAW-1000DS

    Features:

    • 6 columns (4 guiding columns and 2 lifting screws)
    • Servo hydraulic control
    • Computerized control
    • Displacement and force controls 

     

    Model Capacity (kN) Stroke (mm) Tension space Compression space (mm)

    Test width (mm)

    Frame dimensions (mm) Datasheets
    WAW-300DS 300 250 650 650 520 910x530x2170 Contact
    WAW-600DS 600 250 650 650 520 910x530x2170 Contact
    WEW-1000DS 1000 250 650 650 520 960x550x2350 Contact

    Full Name *:

    Company/Organization * :

    Email * :

    Telephone (inc. area code) * :

    State :

    Postcode * :

    Country * :

    Subject *:

    Enquiry details :

    .