Single Force Load cells
LABSEN supplies high quality load cells in a wide range of form factors and various loading ranges from very small loads to very large loads up to 20 MN.
The standard output of sensors is strain gauge bridge. However, alternative output options such as analog 0-5V, 0-10V, 4-20mA or digital outputs (RS 422/485, Profibus, Modbus, CANOpen) are also available as external amplifiers or built-in electronic amplifiers in some models.
Type and Ranges
| Category | Image |
Ranges |
Nonlinear (% FS) |
|
General Tension Compression (S beam)
|
 |
50N to 200kN | 0.02, 0.05 |
|
General Tension Compression (S beam) IP 68 |
 |
1kN to 1.5MN | 0.02, 0.05 |
|
General Tension Compression (S beam with load protection) IP 68 |
 |
1kN to 200kN |
0.02, 0.05 |
|
General Tension Compression (S beam with load protection) IP 68 |
 |
0.5kN to 50kN |
0.02, 0.05 |
| Miniature Tension Compression |  |
10N to 2kN | 0.02, 0.05 |
| Compact Tension Compression |  |
10N to 20kN | 0.02, 0.05 |
| Inline Miniature Tension Compression |  |
20N to 5kN | 0.02, 0.05 |
|
Low profile Loa Cell (Pancake) |
 |
1kN to 300kN | 0.02, 0.05 |
|
Compact Heavy Tension Compression |
 |
10kN to 2MN | 0.02, 0.05 |
|
Large Tension Compression (for large testing machine) |
 |
1MN to 8MN | 0.02, 0.05 |
Depending on your specific applications, we will select suitable load cells with high quality and comparative prices. Please contact us with a short description of your needs.
