Drop Test Systems

  • Packaging Drop Tester

    Packaging drop test is used to determine the effect of impact on the package during use, transportation, loading and unloading. The strictly designed LABTONE “1G+” ensures its accuracy. Apart from accurate plane fall test, it can also perform edge drop and corner drop test to make a complete evaluation on the performance of packaging and product.


    • Satisfy and even beyond GB, IEC, ASTM, ISTA and other industrial standards.
    • Can perform surfaces, corner and edge drops.
    • Precise guiding system and pneumatic driving
    • Unique swing arm structural design, escape acceleration of swing arm greater than 3G.
    • With double column guide, hydraulic buffer will absorb the dynamic force of the swing arm such that the movement is stable, reliable with low noise.
    • Self-locking screw in lifting mechanism to prevent accidental downward glide.
    • Automatic pneumatic interlocks to prevent abnormal detachment of swing arm.
    • Extensible support bracket and bottom slab.

    Specifications of drop test models

    Zero Height Drop Tester

    For large packaging with high mass, the vertical drop height during transport will be low and therefore they need drop test with relatively low drop height. Zero Height Drop Tester is mainly used for drop test of big package. It uses an E-shaped fork as a bracket that can move downward quickly and the specimen is placed in balance according to test requirement (surface, edge or corner drop test). During testing, the bracket moves downwards quickly ahead of specimen with acceleration greater than 3G to ensure the separation of bracket and specimen and achieve free fall. The standard fall distance is ranged between 2.54cm-120cm.


    KDT-2000   Release Hooks

    The KDT2000 Drop Tester is designed to simulate the drops and impacts during transportation. It is especially suited to very large, heavy payloads with different sizes or shapes, also in different kinds of drops (surfaces, corner and edge drops). Testing specimen is elevated to the designed level, and then be released and dropped.


    Drop Height 


    Payload Capacity


    Package Size


    Machine Size


    Machine Weight


    Power / Air Supplies
    DT150 300-1500 85 800x800x800 1500x1500x2100 480 AC 230V / Pneumatic 0.5-0.7MPa
    DT200 300-2000 85 800x800x800 1700x1200x2600 560 AC 230V / Pneumatic 0.5-0.7MPa
    DT020 0-1200 200 1200x1200x1200 2100x1700x2800 2100 3-P AC380V/Pneumatic 0.5-0.7MPa
    DT030 0-1200 300 1200x1200x1200 2100x1700x2800 2300 3-P AC380V/Pneumatic 0.5-0.7MPa
    DT050 0-1200 500 1200x1200x1200 2100x1700x2800 2300 3-P AC380V/Pneumatic 0.5-0.7MPa

    Full Name *:

    Company/Organization * :

    Email * :

    Telephone (inc. area code) * :

    State :

    Postcode * :

    Country * :

    Subject *:

    Enquiry details :