Compression Testing Machines
Based on expertise and experience in control and testing, LABSEN collaborates with the manufacturer UnitedTest for distributing high quality testing machines to our customers. Our products are made for Australian conditions, meet the local regulations, perform safely, provide accurate test data and will last for long life.
To make sure the products satisfy the stringent requirement, LABSEN works with its collaborative manufacturer in
- specifying technical specifications,
- strictly selecting key components,
- on-site check or remotely check any upgrading function.
All key components (servo valves, load cells, displacement sensors, hydraulic seals, etc. ) of the servo hydraulic testing machines are selected from well-known manufacturers whereas other mechanical parts are fabricated in the factory of our collaborative partner.
Furthermore, LABSEN contributes in improving the testing equipment (hardware and control software) and upgrading functions of material testing machines. This unique enhancement is available for our customers to run tests with complex measurement on our supplied testing machines in combining with other existing testing equipment (if available and possible), without ordering entire new testing systems. Please learn more at Enhancing Functions of Material Testing Machines and Customized Testing Systems.
Existing models with loading capacity up to 3MN
|
CTM – 300kN |
YAW 1MN, 2MN, 3MN |
YAW (Flexural,Compression) |
CWF series (Flexural) |
With the loading capacity up to 3 MN, the listed compression machines are commonly capable for testing concrete and FRP-confined concrete specimens.
For the needs of larger compression machines, LABSEN has worked with its partners to supply large testing machines with loading capacities more than 5 MN. LABSEN can supply large servo hydraulic testing machine up to 30 MN (3000 tone, with a large actuator). For more information, please read Customized Test Systems and Contact us.
Servo Hydraulic Compression Machine CTM 300kN
YAW series Compressive Strength Testing Equipment to test cement, brick and concrete is offered by United Test. Range 1000kN, 2000kN, and 3000KN, these strength testing equipment are extremely handy and are easy to use for testing cement, concrete and mortar cubes. We lay utmost importance on equipment design and construct with emphasis on ease of operation.
Conform with test standard ASTM C39, this test method consists of applying a compressive axial load to molded cylinders or cores at a rate which is within a prescribed range until failure occurs. The compressive strength of the specimen is calculated by dividing the maximum load attained during the test by the cross-sectional area of the specimen.
|
Model |
YAW-300 |
 |
Features:
|
| Max. load | 300KN |
| Accuracy of testing force | ±1% of indicated value |
| Max. compress test space | 180mm |
| Upper Compression platen dia. | (Fixed type plate) Φ108mm |
| Upper Compression platen dia. | (Cardan joint type) Φ170mm |
| Lower Compression platen dia. | Φ205mm |
| Piston stroke | 80mm |
| Power supply | 220V, 50HZ, 1 phase |
| Dimension | 930×550×1400mm |
| Weight | 450Kg |
| Power | 0.75kW（Pump power 0.55 kW） |
| Standard Accessories | Loadframe, computer, English compression test software, load cell, compression platen, Safety net cover, English operation manual |
| Data sheet download | Please Contact |
Servo Hydraulic Compression & Bending YAW-1000 / 2000 / 3000
YAW series Compressive Strength Testing Equipment to test cement, brick and concrete is offered by United Test. Range 1000KN, 2000KN, and 3000KN, these strength testing equipment are extremely handy and are easy to use for testing cement, concrete and mortar cubes. We lay utmost importance on equipment design and construct with emphasis on ease of operation.
Conform with test standard ASTM C39, this test method consists of applying a compressive axial load to molded cylinders or cores at a rate which is within a prescribed range until failure occurs. The compressive strength of the specimen is calculated by dividing the maximum load attained during the test by the cross-sectional area of the specimen.
| Model | YAW-1000 / YAW-2000 / YAW-3000 | |
 |
Features:
|
|
| Max. load | 1000kN / 2000kN / 3000kN | |
| Accuracy of testing force | ±1% of indicated value | |
| Load resolution | 0.01kN | |
| Frame structure | 4 columns frame | |
| Upper compression platen dia. | Φ300mm | |
| Piston moving speed | 0-60mm/min | |
| Distance between two platens | 360mm | |
| Columns effective intervals | 400×320mm | |
| Piston stroke | 200mm | |
| Power supply | 220V, 50HZ, 1 phase | |
| Dimension of frame | 640×560×1500mm / 640×560×1500mm / 700×580×1650mm | |
| Dimension of oil power box | 700×540×1500mm | |
| Weight | 1500kg / 155kg / 2100kg | |
| Standard Accessories | Loadframe, load cell, industry computer, compression platen, close loop controller, Software, unitary oil source cabinet, English operation manual | |
| Data sheet download | Please Contact | |
Servo Hydraulic Compression & Bending YAW-300B (300kN)
YAW Series Hydraulic Compression Strength Testing Machine to test cement, brick and concrete is offered by United Test. Use hydraulic power driving, hydraulic servo control technology, computer to collect and process data, close loop test with high accuracy for various test materials. Consist of frame, oil source, control system, test fixture. Accuracy class 1, max. test load 300KN.
| Model | YAW-300B |
|
Features:
|
| Max. load | 300KN |
| Accuracy of testing force | ±1% of indicated value |
| Max. compress test space | 180mm |
| Upper Compression platen dia. | (Fixed type plate) Φ108mm |
| Upper Compression platen dia. | (Cardan joint type) Φ170mm |
| Lower Compression platen dia. | Φ205mm |
| Piston stroke | 80mm |
| Power supply | AC 220V, 50HZ, 1 phase |
| Dimension | 930×550×1400mm |
| Weight | 450Kg |
| Power | 0.75kW（Pump power 0.55 kW） |
| Standard Accessories | Loadframe, computer, English compression test software, load cell, compression platen, Safety net cover, English operation manual |
| Data sheet download | Please Contact |
Servo Hydraulic Sleeper Bending Model CWF
CWF series Flexure Testing Machine mainly used to test the static load bending/flexural test of concrete sleeper, include III type sleeper, cross sleeper, bridge sleeper, wide railway sleeper etc., quickly and accuracy check the flexural strength.
Frame is tower structure, with high stiffness and stability. Add the extra accessories can do bending fatigue test also. With the completely protection system, no splash when sample break.
Conform with international standard of TS 205-1, EN ISO 7438, EN 14730-1, TS EN 13230-2, TS EN 14587-2:2009 etc. .
| Model | CWF |
 |
Features:
|
| Max. load | 300kN |
| Accuracy of testing force | ±1% of indicated value |
| Max. compress test space | 180mm |
| Upper Compression platen dia. | (Fixed type plate) Φ108mm |
| Upper Compression platen dia. | (Cardan joint type) Φ170mm |
| Lower Compression platen dia. | Φ205mm |
| Piston stroke | 80mm |
| Power supply | 220V, 50HZ, 1 phase |
| Dimension | 930×550×1400mm |
| Weight | 450kg |
| Power | 0.75kW（Pump power 0.55 kW） |
| Standard Accessories | Loadframe, computer, English compression test software, load cell, compression platen, Safety net cover, English operation manual |
| Datasheet download | Please Contact |
